This is the radio controlled, electric powered Dumas DH-82 Park Flyer Kit. FEATURES: Construction: Hand selected laser cut balsa Vacuum molded cowl and spinner Rudder and Elevator Control: Wire pushrod Servo Placement: Mounted in rails on fuselage Landing Gear: 1/16" diameter wire front, tail wire skid requires bending INCLUDES: All balsa, lightweight colored (black and white) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl and spinner REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive GWSG2023 3 channel radio system (minimum) 3 micro servos 5A ESC w/BEC GWSM2059 2 cell 700mAh LiPo battery GWS 9x7 prop, GWSQ2019 Building and field equipment SPECS: Length: 25" (635mm) Wingspan: 35" (889mm) Wing Area: 352sq.in. (22.74 sq dm) Airfoil: Flat bottom Center of Gravity (CG): 3-7/16" 87.5mm) back from the leading edge of the TOP wing Control Throws- Elevator, Up and Down: 1/2" (13mm) Rudder, Left and Right: 1" (25.5mm) rmb 9-21-06 ir/jxs