This is the radio controlled, electric powered Dumas Piper PA-20 Pacer Park Flyer Kit. FEATURES: Construction: Hand selected laser cut balsa Vacuum molded nose cowl Rudder Control: Pull-pull cables Elevator Control: Wire pushrod Servo Placement: Mounted in rails on fuselage Landing Gear: 1/16" diameter wire front, .041 diameter wire rear, requires bending INCLUDES: All balsa, lightweight colored (black, white and red) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, one 3/4" (19mm) lightweight plastic tail wheel, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, acetate sheet for windows REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive GWSG2023 3 channel radio system (minimum) 3 micro servos 5A ESC w/BEC GWSM2059 2 cell 700mAh LiPo battery GWS 9x7 prop, GWSQ2019 Building and field equipment SPECS: Length: 27" (686mm) Wingspan: 40" (1016mm) Wing Area: 272 sq.in. (17.57 sq dm) Airfoil: Flat bottom, high wing placement Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side Control Throws- Elevator, Up and Down: 9/16" (14mm) Rudder, Left and Right: 15/16" (23.5mm) rmb 9-21-06 ir/jxs