This is the electric powered, radio controlled, park scale Dumas WACO ARE Airplane Kit. FEATURES: Construction: Laser cut balsa Wing: Two piece with center section, high mount placement Covering: Two sheets of red and two sheets of white tissue Cowl: Vacuum molded plastic, white in color Wheels: Two 1.75" (45mm) diameter lightweight foam main wheels and one 0.75" (19mm) plastic tail wheel Windows: Three sheets acetate with pattern in manual for all windows INCLUDES: All required balsa, One sheet of yellow tissue, cowl, one fake engine decal, two wheels, one sheet, hardware, instruction manual and two full-size plan sheets. REQUIRES: Electric Motor: GWS "A" or MPI EPU-6 drive unit Radio: 3-channel with micro size receiver Servos: Two micro size for rudder and elevator Electronic Speed Control: 5A with BEC Battery: 7.4V 700mAh Lithium Polymer Propeller: 9x7 for electric application Finish For Covering: Butyrate dope such as Midwest Aerogloss, light- weight Mylar covering can also be used, see COMMENTS Building and field equipment SPECS: Wingspan: 35" (889mm) Center of Gravity (CG): 2-7/16"(62mm) from the leading edge of the wing measured at the fuselage Control Throws: Elevator: up and down 3/4" (19mm) Rudder: left and right 5/8" (16mm) Airfoil: Flat bottom COMMENTS: Do not use Ultra Cote or MonoKote covering. It is too heavy and will shrink too much damaging the lightweight structures. NNA 8/3/05 ir/jxs