This is the electric powered, radio controlled, park scale Dumas L19 Bird Dog Airplane Kit. FEATURES: Construction: Laser cut balsa Wing: Two piece with center section, high mount placement Covering: Two sheets of red and two sheets of white tissue Cowl: Vacuum molded plastic, white in color Landing Gear: Preformed wire .062" (1.6mm) diameter with .032" (0.81mm) diameter tail wheel wire Wheels: Two 1.75" (45mm) diameter lightweight foam main wheels and one 0.75" (19mm) plastic tail wheel Windows: Three sheets acetate with pattern in manual for all windows Rudder: Pull-pull style with horn and cables included INCLUDES: All required balsa, two sheets red and two sheets white tissue, cowl, two decal sheets, three wheels, three acetate sheets, hardware, instruction manual and two full-size plan sheets REQUIRES: Electric Motor: GWS "A" (IPS-DX2BB-AXCS) or MPI EPU-6 drive unit recommended per Dumas Radio: 3-channel with micro size receiver Servos: Two micro size for rudder and elevator Electronic Speed Control: 5A with BEC Battery: 7.4V 700mAh Lithium Polymer Propeller: 9x7 for electric application Finish For Covering: Butyrate dope such as Midwest Aerogloss, light- weight Mylar covering can also be used, see COMMENTS Building and field equipment SPECS: Length: 27" (68.6cm) Wingspan: 40" (101.6cm) Wing Area: 215 sq in (13.89 sq dm) Motor Placement: Offset 1.5° right thrust Center of Gravity (CG): 1-7/8" (48mm) from the leading edge of the wing measured at the fuselage Control Throws: Elevator: up and down 3/4" (19mm) Rudder: left and right 7/8" (22mm) Airfoil: Flat bottom COMMENTS: Do not use Ultra Cote or MonoKote covering. It is too heavy and will shrink too much, damaging the lightweight structures. jxs 7/14/05 ir/jxs