This is the Glow Powered, 2.4GHz Radio Controlled, Ready to Run, 1/10 Scale Nitro Slash Short Course Racing Truck from Traxxas. **The included TQ 2.4GHz radio system is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** FEATURES: Chassis: 0.098" (2.5mm) thick 6061-T6 aluminum Drive: Two wheel shaft drive with heavy duty telescoping driveshafts Engine: TRX 3.3 with EZ-Start electric starter, slide valve carburetor, dual stage foam air filter, and tuned pipe Radio: 2.4GHz TQ 2-channel with high torque steering and throttle servos Receiver Box: Enclosed for protection from dust and debris Transmission: Magnum 281 with metal top gear and idler gear, adjustable slipper clutch Fuel Tank: 5oz (150cc) Shocks: X-Tra long high volume, oil filled Ultra shocks Differential: Planetary type with steel gears Body: Officially licensed Race Replica trimmed and painted Bumpers: Front and rear flexible plastic Steering: Bellcrank type with servo saver Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Brake: Steel discs with semi-metallic pads Starter Battery: Traxxas 1500mAh NiMH Power Cell with Standard connector Battery Charger: 110V AC wall type Tires: 2.2" (56mm) Licensed BF Goodrich Mud Terrain T/A, S1 rubber compound with inserts Wheels: Five spoke, bead lock look, 2.2" (56mm) outer diameter, 3.0" (76mm) inner diameter, black in color INCLUDES: RTR Nitro Slash SC Truck with TQ 2.4GHz 2-ch Radio, Engine with Electric Starter, Starter Battery, Charger, Painted Body, extra Glow Plug, Fuel Bottle, Nitro Tuning DVD, and Instruction Manual REQUIRES: Fuel: 10%-20% nitro content, 20% recommended for break-in AA Batteries: Four for transmitter Track and maintenance equipment SPECS: Vehicle- Length: 22.24" (565mm) Height: 7.40" (188mm) Front and Rear Track: 11.65" (296mm) distance from outer edges of tires, side-to-side Wheelbase: 13.07" (332mm) Gear Ratio: 2.81 Body- Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) COMMENTS: Available in the following officially licensed Race Replica body styles; TRAD77LR Black/Red, Chad Hord Edition TRAD77NW Orange/White, Robby Gordon Edition TRAD77RL Red/Black, Mark Jenkins Edition TRAD77SL Silver/Black, Rob MacCachren Edition The ball bearings in the 2wd Traxxas Nitro Slash are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax: Qty. Size Location Qty. Bearing Set 4 5x11mm Fr Hubs 2 DTXC1547 4 5x11mm Rear Hubs 2 DTXC1547 2 5x11mm Clutch 2 DTXC1547 6 5x11mm Transmission 3 DTXC1547 2 5x8mm Transmission 1 DTXC1523 4 5x8mm Steering 2 DTXC1523 jxs 01/08/13 ir/jxs