This is the radio controlled, electric powered, Multiplex ParkMaster 3D Park Flyer Airplane Kit. For Intermediate Modelers. Fully 3D capable, can be flown outdoors in moderate wind. FEATURES: Construction: Elapor foam white in color Wings: One-piece all foam Radio Compartment: Accessible under wing Aileron Control: Dual servo Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter, Wheels: Two foam 2" (51mm) Canopy: Elapor foam Decals: Peel and stick application with yellow, blue and green accents Building Time: Ready to fly in several hours INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all hardware, pre-bent 0.008" (2mm) wire landing gear, two 2" (51mm) main wheels, plastic motor mount, decal sheet and photo-illustrated instructions REQUIRES: Motor: Multiplex makes a power set for this kit that includes a Himax 2816-0890 Motor, BL-17 Speed Control, APC 11 x 5.5" taper collet and prop driver (MPUG3231) Battery: Multiplex #15 7116 (not carried) Battery Charger: LiPo compatible Radio: 4 channel Servos: Four micro, 2-Aileron, 1-Elevator, 1-Rudder OR order MPUL9231 Flight Pack which includes servos, receiver and extensions in one package Misc. Items: Building and field equipment SPECS: Wingspan: 37.8" (960mm) Wing Area: 565 sq in (36.5 sq dm) Weight: 18.5oz (525g) Wing Loading: 5.9 oz/sq ft) (18 g/sq dm) Length: 39.4" (1000mm) Airfoil: Fully symmetrical, mid-wing placement Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing"s leading edge at the fuselage Control Throws- Ailerons: 2.5" (65mm) Elevator: 2.5" (65mm) Rudder: 3.5" (90mm) COMMENTS: This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer. jxs 8/20/08 ir/jxs