This is the radio controlled, glow powered, almost ready-to-fly, 1/7 scale Top Flite P-40 Warhawk .60 size Sport Scale Airplane. For Intermediate to Advanced Modeler/Fliers. FEATURES: Construction: Built up balsa and light ply fuselage and wings Wing: One-piece, with built-in flaps and plywood wing joiner Covering: Factory applied Top Flite MonoKote Radio Compartment: Easily accessible, plywood reinforced Cowling: Pre-painted fiberglass Air Scoop: Pre-painted fiberglass Canopy: Vacu-formed clear, pre-painted Landing Gear: Prebent wire, retractable landing gear, (not included) can also be installed Landing Gear Pods: Painted fiberglass hides retracts when optional retractable landing gear is installed Wheels: Foam, main, two 3.25" (83mm), one 1.25" (31.75mm) tailwheel Engine Mount: Two-piece composite Flap/Aileron Control: Two servos per wing half (1 Flap, 1 Aileron) Spinner: Constructed of aluminum, 4" (102mm) diameter, painted red Cockpit Kit: Instrument panels, side panels and seat back Building Time: Ready to fly in only 18-25 hours Warranty: Top Flite Models guarantees this kit to be free of defects in material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, main landing gear, two main wheels, tailwheel, adjustable engine mount, painted canopy, 14oz (420cc) fuel tank, instrument panel, fiberglass cowl, seat back, belly pan, extensive hardware package and photo-illustrated instructions REQUIRES: Engine: .60 - .91 cu in (10 - 15cc) 2-stroke OR .90 - 1.20 cu in (15 - 20cc) 4-stroke Radio: 5-6 channel Servos: 7 Standard, minimum 50 oz-in (3.6 kg-cm) 2-Aileron, 1- Elevator, 1-Throttle, 1-Rudder, 2-flap servos, 1-Retract Servo (if using retracts) 12" (305mm) Servo Extensions: Two, one for each aileron servo 6" (152mm) Servo Extensions: Two for flap servos Y-Harness: Two Receiver Battery: 1000mAh minimum Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment. SPECS: Wingspan: 64.5" (1640mm) Wing Area: 722 sq in (46.6 sq dm) Weight: 9.75 - 10lb (4420 - 4536g) Wing Loading: 31 - 32 oz/sq ft (95 - 98 g/sq dm) Length: 55" (1395mm) Airfoil: Fully-symmetrical, low-wing Center of Gravity: 3-1/4" (83mm) Back from the wing"s leading edge Control Throws: High Rate Low Rate Elevator: Up & Down 5/8" (16mm) 11° 7/16" (11mm) 7° Rudder: Right to Left 1-1/2" (38mm) 18° 1" (25mm) 12° Ailerons: Up & Down 5/8" (16mm) 14° 1/2" (38mm) 12° Flaps: Full Rate Up 1-1/2" (38mm) down 1/2 Rate 3/4" (19mm) 15° COMMENTS: This kit is covered in the following Top Flite MonoKote colors: Missle Red (TOPQ0201) only used on insignias White (TOPQ0204) only used on insignias Matte Insignia Blue (TOPQ0507) only used on insignias Matte Black (TOPQ0508) only used on anti-slip wing walks Matte Olive Drab Matte Dove Gray (TOPQ0511) Matte Tan (TOPQ0516) If a replacement fuel tank is needed, order the Sullivan 14oz tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214). Some minor trimming and modifications may be required. jxs 05/14/10 ir/jxs