This is the Top Flite Glow Powered, Almost Ready-to-Fly, Flite Streak Control Line Profile Model Airplane. Perfect for training, stunt flying, or exciting combat fun. Suitable for ages 14 and older. FEATURES: Construction: Balsa and plywood Wings: One-piece, built up balsa, shoulder mount Fuselage: Wooden profile type Covering: Factory applied adhesive backed Top Flite MonoKote, color scheme is Black on the forward section of the wing and fuselage, with White and Red on the wing and Red on the upper rear section of the fuselage and tail section Canopy: Brown tinted single canopy Landing Gear: .12" (3mm) fixed wire with one 1¾" (44mm) foam wheel Building Time: Ready to fly in only 2-3 hours, bellcrank and leadouts are preinstalled Warranty Period: Top Flite Models guarantees this kit free of defects Warranty does not cover any part damaged by use or modification. INCLUDES: One Flite Streak Control Line profile model airplane by Top Flite decal sheet, metal fuel tank, hardware bag, elevator pushrod, 1¾" (44mm) foam wheel, landing gear wire, photo-illustrated manual REQUIRES: Engine: .25-.40 cu in (4.1-6.5cc) 2-stroke, control line type An R/C engine can be used if the carburetor arm is held in the full throttle position with some type of linkage (not supplied) Muffler: Stock muffler supplied with engine Misc. Items: medium fuel tubing, propeller, safety nut, fuel filter filter, building and field equipment, control line, handle, and connectors SPECS: Wingspan: 41.5" (1055mm) Wing Area: 398 sq in (26 sq dm) Wing Loading: 8.8oz/sq ft (25 g/sq dm) Weight: 24-26oz (680-737g) Length: 27" (685mm) Airfoil: Fully symmetrical Elevator Control Throw: 3/8" (10mm) up and down Center of Gravity: 3¼" (82.6mm) Back from the wing"s leading edge at the fuselage side COMMENTS: Following are the Top Flite MonoKote colors used to cover this model and order numbers for six foot rolls. White TOPQ0204 Black TOPQ0208 Red TOPQ0201 jxs 4/29/03 ir/jxs