This is the 1/8 scale radio controlled, glow powered RC8.2 Factory Team Buggy Kit from Team Associated. FEATURES: Chassis: Factory Team 7075 hard anodized aluminum 0.12" (3mm) thick with one-piece top plate and molded composite front and rear braces Drive: Four wheel shaft drive with CVA boots on center and rear drive joints, Factory Team 7075 aluminum axles and center drives Shocks: Factory Team 16mm Big Bore oil-filled, hard anodized bodies and 4mm titanium nitride coated shafts, steel alloy standoffs Shock Towers: Factory Team 7075 aluminum, low center of gravity design with optimized geometry, 0.20" (5mm) thick Clutch: Machined aluminum racing type, 16 tooth clutch bell Air Filter: Low profile elliptical high-flow two stage Fuel Tank: Anti-foaming, easily removed with two clips Radio Tray: Molded composite with optional forward placement battery box for increased steering Wheels: Factory Team 3.3" (83mm) diameter dish wheels, white in color 1.7 (42.2mm) wide Body: JConcepts Punisher body with Illuzion wing, low CG wing mount Suspension: Newly designed arms with centerline shock mounts and optimized anti-roll bar suspension, Factory Team 7075 blue aluminum lower suspension mounts Steering: Bellcrank type with servo saver, Factory Team 7075 blue aluminum knuckles and steering posts Caster: Adjustable 14°,16°, or 18° with molded inserts, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: Associated Factory Team RC8.2 Buggy kit Factory Team shocks, fully adjustable wing, pre-assembled front and rear suspension, wheels, hard-coated threaded shocks with rubber boots, 44T spur gear, clear body, 16 tooth clutch bell, air filter, decals, instructions REQUIRES: Radio: 2-Channel with 2 Servos Radio Batteries: (8) AA size Receiver Battery: 4.8-7.4V flat or hump NiMH or 1600-2100 LiPo pack Engine: .21 rear-exhaust Fuel: 2-cycle glow fuel with 10%-15% nitromethane Glow Starter: 1.2 volt Starter Box Tires: 1/8 scale buggy Paint: Lexan specific spray or brush-on Misc. Items: Fuel bottle, building and track equipment SPECS: Vehicle- Length: 18.6" (473mm) Width: 12" (305mm) Weight: 6.98 lbs (3167g) Wheelbase: 12.7 - 12.8" (323 - 326mm) Internal Gear Ratio: 4.30:1 Body- Length: 12.8" (325mm) Width: 8" (204mm) at widest point Height: 4" (102mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x16mm Front & Rear Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 4 8x16mm Front Hubs 2 DTXC1585 4 8x16mm Rear Hubs 2 DTXC1585 4 6x10mm Steering 2 DTXC1561 2 8x16mm Front Bulkhead 1 DTXC1585 2 8x16mm Rear Bulkhead 1 DTXC1585 4 15x21mm Front Suspension 2 ASCC6862 4 15x21mm Rear Suspension 2 ASCC6862 2 8x16mm Rear gearbox 1 DTXC1585 2 5x10mm Clutch 1 DTXC1535 jxs 10/28/11 ir/jxs