This is the electric powered, radio controlled, 1/8 scale RC8.2E Factory Team Off-Road Competition Buggy Kit from Team Associated. FEATURES: Chassis: 7075 hard anodized aluminum 0.14" (3.5mm) thick, lengthened 3mm from original chassis, molded composite front and rear chassis braces and radio tray Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center drives, 3.5mm light CVA drivetrain with full ball bearings Motor Mount: Factory Team sliding design, aluminum construction, blue in color Body: JConcepts clear Punisher Body and black plastic Illuzion wing Differentials: Planetary gear Shocks: Factory Team 16mm Big Bore hard anodized with 4mm titanium nitride coated shafts, steel alloy shock standoffs and 30wt silicone shock oil Shock Towers: Factory Team 0.20" (5mm) 7075 aluminum low-center-of- gravity Suspension: Factory Team 7075 blue aluminum mounts with new arms that feature centerline shock mounts and optimized anti-roll bar position Steering: Factory Team 7075 blue aluminum steering knuckles Ball Bearings: Full set included Wheels: Dish type, white in color 17mm hex, 1.6" (49mm) wide, 3.3" (83mm) diameter Caster: Adjustable with caster blocks that adjust 14, 16, or 18° with molded inserts, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: RC8.2E Factory Team Off-Road Buggy Kit with Wheels, Shock Oil, clear Body, Rear Wing, Decals and Instruction Manual REQUIRES: Radio: 2-channel with high torque steering servo Motor and ESC: Brushless system for 1/8 scale buggy Tires: 1/8 scale buggy Battery: 2S-4S 7.4V LiPo pack Battery Charger: LiPo compatible Polycarbonate safe paint, building and track equipment SPECS: Vehicle; Length: 18.5" (470mm) Width: 12" (305mm) Wheelbase: 12.7" (323mm) Internal Gear Ratio: 4.30:1 Weight: 7.9lbs (3570g) Body; Length: 14.6" (370mm) Width: 7.9" (200mm) Height: 4.4" (112mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x16mm Front Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 2 8x16mm Rear Diff 1 DTXC1585 2 8x16mm Front Hubs 1 DTXC1585 2 15x21mm Front Hubs 1 DTXC1601 2 8x16mm Rear Bulkhead 1 DTXC1585 2 8x16mm Rear Hubs 1 DTXC1585 2 15x21mm Rear Hubs 1 DTXC1601 jxs 10/25/11 ir/jxs