This is the 2.4GHz Radio Controlled, Brushless Electric Powered RXR (Receiver Ready) Sensei Foam Trainer Airplane from Flyzone. This version includes motor, ESC and servos. FEATURES: Construction: Aero-Cell foam with "drop door" in fuselage to deploy a parachute or other creative payloads while in flight Wings: Two piece Aileron Control: Dual servo Tail Section: Attaches with one screw and features self-aligning stabilizer Motor: Brushless 1350Kv (FLZA6174) Electronic Speed Control: 30A brushless compatible Servos: Five micro Landing Gear: Main, prebent aluminum 0.098" (2.5mm) thick Wheels: Three foam 2.5" (63.5mm) Propeller: 10x5 plastic Spinner: 1.75" (45mm) diameter black plastic Warranty: Flyzone guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: Sensei Foam Trainer Airplane with Motor ESC, five micro Servos, Prop, Spinner, Landing Gear, Wheels and Instruction Manual REQUIRES: Transmitter/Receiver: 6-channel, TACJ2600 AA Batteries: Four if using transmitter listed above LiPo Battery: 2100mAh 11.1V, FLZA6173 Battery Charger: LiPo compatible w/balancing capability, GPMM3155 Pliers and phillips screwdriver SPECS: Wingspan: 58" (1475mm) Wing Area: 566 sq in (36.5 sq dm) RTF Weight: 3.2lbs (1450g) Length: 48" (1220mm) Airfoil: Flat bottom Configuration: High wing Center of Gravity: Draw a mark 1/4" (7mm) back and 1/4" (7mm) forward from the front of the aileron servo cover. The plane should balance between these two marks. Control Throws: Elevator, Up/Down: 1/2" (15mm) Rudder, Right/Left: 5/8" (16mm) Ailerons, Up/Down: 1/2" (15mm) jxs 06/30/11 ir/jxs