Product Description ◆ Scythe original design 14cm large top flow cooler, 6mm 2 this pipe, hybrid configuration of two 8mm pipe, Intel latest socket LGA1150 "Haswell" and LGA2011 V3 corresponding · AMD latest socket FM2 + "Kaveri" correspondence ◆Top Mount fan structure, by adopting the orthodox structure that shed wind from the cooler top to the motherboard direction, was to allow the cooling, such as chipsets and MOS-FET of VR module of peripheral socket ◆ by providing a gap between the X spatial fin structure, the fin structure, improves the airflow to the components of the conventional top-flow type motherboard, and also to ensure clearance around the motherboard is arranged to the upper cooling portion , to avoid that the CPU cooler itself to inhibit airflow through the system ◆ Adopt 0.4mm thick fins to increase the rigidity and thermal conductivity of the heat sink, adopt the luxurious to prevent oxidation "nickel plating process" in the heat pipe High precision base structure adopted "by a copper heat-receiving base plate a thick, you sucked up to ensure the heat generated by the CPU." ◆Rotational speed: 400 (± 300rpm) ~ 1300rpm (± 10%) noise / air flow: Low 12.5 ~ 30.7dBA / 29.90 ~ 97.18CFM ★ adopted a new design and bridge-type retention (dedicated driver included) ★ size: 140 (W) × 147 (H) × 171 (D) mm (including accessories fan) Weight: 790g (including accessories fan) ★ RoHS compliant environment-friendly products