Instructions - how to use white paint on the bath: 1. The surface to be painted should be clean and free of grease. The preparation of surface is crucial for ensuring a good result. Clean the bath using abrasive cleaner and rinse throughly Sanding surface with very fine sand paper would also be advised. .2. The best result can be achieved by painting at a temperature of +18 C or higher. If painting indoors make sure to cover all surfaces near by , mirrors etc if in bathroom, as an invisible particles of dust from spray paint may cumulate on surfaces causing white sediment 3. Remove the protective cover. Shake the container vigorously for about one minute, allowing it to mix and even the color of the paint and prevent clogging the nozzle 4. Apply the paint while holding the container at a distance of 30 cm from the surface. 5. Press firmly and do the monotonous rhythmical, smooth movements during painting. 6. Several thin coats will give a much better end result than one thick coat of paint applied. White lacquer paint drying time: After 6 hours paint is resistan to touch, the full resistance of the coating is obtained after 48 hours. After finishing the work, clean the spray button, turning the container upside down, pressing the button for two seconds