Lamp soldering "Motor Sich PL-0,5" Is designed to perform soldering, thermal works, allow - ing outdoor heating in industrial, household and road conditions. Description Lamp soldering Motor Sich 0.5 liters blowtorch "Motor Sich PL-0,5" is a heating unit designed to produce high flame temperatures of up to 1000 -1100°C, which can be used for soldering, thermal works, allowing outdoor heating in industrial, household and road conditions. The lamp works on all brands of gasoline (except leaded octane no higher than 92), alcohol, kerosene, mixture. Easy and convenient to use. Technical characteristics: Capacity of tank, l, not less than not less than 0,5±5% fuel Consumption, kg / h, not more on gasoline 0,80 - 0,60 kerosene - a mixture of benzy on kerosene (50%+50%) 0,70 overall dimensions, mm, not more :260x200x92 Weight of tank (without fuel), kg, no more than 1,2 In the preparation of lamps to work, do the following: Rekonstruiruet the lamp, for what loosen the a nut of the pump, remove the pump and wash thoroughly with gasoline inner surface. The outer surface of the wipe cloth. Insert the lamp clean filtered gasoline is not more than ¾ of its volume, the leaks are not allowed. Install the pump and tighten the nut of the pump. In tank pump, inflate the air (20-25 strokes). In a dish pour half of the gasoline and ignite. When the afterburning fuel in vanocka gradually loosen the handwheel (pravrajita it counterclockwise) to obtain a stable flame. As the reduction flame it is necessary to pump air into the tank. Blowtorch is a potentially explosive device, as the reservoir is a mixture of fuel vapor and air under high pressure, and the tank heats up during operation. So if you are using a blowtorch requires strict observance of safety rules, namely: Not to allow the heating tank to a temperature exceeding 50 °C. do Not open the lid of the tank and not to refuel while operating or still hot lamp. Not to create a bulb gauge pressure.