The Combi Rail PRO Light System inlcudes a lighting track as well as a hanging rail suitable for Home, Office or Gallery.The Combi Rail PRO Light System is the top end of hanging rail systems, and allows you to fit lights above the rail as well as hanging pictures below.You will need to order the transformer with the rail which simply plugs into a standard 3 pin, 13 amp socket. Once connected the lights can be positioned anywhere along the rail. The system is very easy to install in a few simple steps.1. Fix the wall brackets to the wall using one wall plug and screw per bracket. (The wall brackets and fixings come with the Combi Rail PRO Light as standard so no need to order seperately).2. Click the rail onto the wall brackets. This can be done by hand or by using a soft rubber mallet if required.3. To join 2 lengths of Combi Rail PRO Light together you will need to use a connector to allow the power to flow through both lengths.4. Finish of the rail with an end cap on one end and fit the transformer connector into the other(The transformer can fit into either end).5. Fit a light into the top of the rail by simply pushing into the rail and twisting to lock. Then fit a standard MR16 bulb.6. Using the Twister Perlon (Hanging WIre) simply push up into the rail from underneath, twist and lock down. These can be positioned anywhere along the rail and any excess can be simply cut off using a pair of scissors.7. Choose the required hook. These are ususally chosen on the basis of the weight of the pictures to be hung however the ratchet hooks are the easiest to use due to there simple spring action lock system.8. Finally hang your pictures, turn on the lights, sit back and relax.We have made up a kit to give you an idea of cost for a 2 metre run. Extra hooks and wires can be added to the kit if required.Combi Rail Pro Light, 2 metres including wall brackets, end caps & fixings.