You already have a Raspberry Pi in use and perhaps even implemented a first electronic project? Then you are right here: This learning package has everything you need to implement more than just simple projects: 62 components as well as a 160-page manual. After you have implemented the projects 20 described in detail, you"re ready for the world of the Maker. ISBN 978-3-645-65269-8 Plan your next project Your Raspberry Pi can do much more than you thought: Control your mini computer with spoons, you can move songs on the LCD or build your own binary clock. Thanks to the graphical programming language Scratch works out everything in no time. Prior knowledge of programming is not required. If the GPIO ports are not sufficient for your ideas, you"ll learn in a project, how to expand the ports Parts Included: (The Raspberry Pi module is not included in this package) 3x Plug-in board / Breadboard •1x LCD (2 lines / 2 rows) •1x port expander •2x LED blue / blue •2x LED yellow / yellow •2x LED green / green •2x LED orange / orange •2x LED red / red •1x IDC Connector / Header •4x button / button •1x 15 kOhm potentiometer / potentiometer •4x 10 ohm resistor / Resistor •4x 1 kOhm resistor / Resistor •10x 220 ohm resistor / Resistor •1x 560 ohm resistor / Resistor •6x 22 MOhm resistor / Resistor •12x GPIO connection cable / GPIO connecting cable •2x 1m insulated jumper wire / wire isolated •2x crocodile Cable / Cable with aligator clips