This is the electric powered 1/10 scale, Ferrari 599XX On-Road Car Kit. This car can be used in Tamiya Official Races. FEATURES: Chassis: TT-01 type E composite chassis-compatible with a variety of Tamiya Option Parts, fiberglass reinforced nylon resin upper deck Drive: Four wheel shaft drive Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541 Motor: 540 motor with pre-attached leads Ball Bearings: Installed in differentials, bushings in wheel hubs Shocks: Friction, plastic body Gearbox: Sealed, front and rear Differentials: Bevel gear, ball bearing equipped Transmission: Single speed Body: Clear untrimmed, with window mask and body trim decals Tires: Slick 1.0" (26mm) wide, 2.6" (65.5mm) diameter Wheels: Lace pattern black 2.0" (52mm) outer diameter, 1.0" (26mm) wide and set of silver colored 0.94" (24mm) wide, 2.0" (52mm) diameter wheels with +2 offset Bumper: Front foam Suspension: Independent double wishbone Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver YOU WILL RECEIVE: Ferrari 599XX 540 motor, ESC, clear body, tires, foam bumper, 19T pinion gear, 61 tooth spur gear, window mask decals, two sets of wheels and instruction manual REQUIREMENTS: Radio: 2-channel with one standard servo Radio Batteries: 8 AA size (for transmitter) Battery: 6-cell stick pack with standard connector Charger: AC/DC timed or peak for 6-cell ba