GoldX networking cables stand out from the rest of the networking cables. These cables have the unique ability to switch from snag-less to standard clips and then switch back. This switch can be done by rotating the snag-less cover out of the way or removing it totally. Once the clip has been removed, it can be replaced just as easily. Ethernet networks are the most common type of networks in existence today. Most of them currently run over twisted pair (UTP) cable. In this network, cross connections between walls and computers, patch panels and equipment, or between two pieces of equipment use patch cables. This cable is designed to go between a computer and the wall or between a patch panel and a piece of equipment. This GoldX patch cable is compliant with EIA/TIA 568 B.2 standard at a Enhanced Category 5 Level (commonly called Cat 5e). Cat 5e will support the following speed and protocols: 10 Megabit per second Ethernet (10Base-T), 100 Megabit per second fast Ethernet (100Base-TX) and 1 Gigabit per second gigabit Ethernet (1000Base-T). This cable is unique because of the patent pending snag less boot on the ends of the cable. This allows the user to remove the snag less feature, and then replace the snag less feature at will. If the user does not want to remove it, it can be rotated out of the way as well.