Specifications - Mfr Part Number: R-FSP600-80ETN- Features: - Complied with ATX12V V2.3 and EPS12V V2.92 standard - Active Power Factor Correction (PFC) meet EN61000-3-2 - High efficiency and reliability - Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances) - Remote On/Off function - Internal 12V DC fan included - Noise Killer (thermal fan speed control function) - Low noise and ripple - Output over voltage, short circuit, and over current protection - 100% Hi-pot, ATE, and burn-in tested - Re-settable power shut down - Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation - Approved by CUL/UL60950-1, TUV EN60950-1, CB60950-1 report, FCC, EMC - Input: - Input Range: 90~264VAC, Full Range Input - Frequency: 47~63Hz - Input Current: 8 Amp (maximum) at 100-127 Vrms / 60 Hz; 4 Amp (maximum) at 200-240 Vrms / 50 Hz - Inrush Current: No damage - Output: - Total Watts: 600W - Output Voltage: +3.3V @ 20A, +5V @ 18A, +12V1 @ 18A, +12V2 @ 18A, +12V3 @ 18A, +12V4 @ 18A, -12V @ 0.3A, +5Vsb @ 3A - +3.3V and +5V total output not exceed 100W - Connectors: 1x 24 pin Main Connector, 1x 4+4 pin EPS12V / ATX12V Connector, 2x 6+2 pin PCI-Express Connectors, 6x SATA Connectors, 4x Peripheral Connectors, 1x FDD Connector- Efficiency: 89% minimum, typical up to 92%- Rise Time: 15ms maximum- Hold-up Time: 17ms minimum at nominal input voltage- Power Good Signal: Power on delay time 100 ~ 500 ms, off delay 1ms minimum (TTL and CMOS compatible)- Leakage Current: Less than 3.5mA at 264Vac, 50Hz- MTBF: 100,000 hours on maximum load at +25°C- Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 85.8 mm- RoHS Compliant