Drop-Forged Carbon Steel Working Load Limits Apply Only to Eyebolts in Lifting or Pulling Applications Regular Nut Eyeblots Are Not To Be Used For Angular Lifting. Galvanized to Meet ASTM A-153 Specifications Make Sure the Eyebolt is Properly Seated by Screwing It Down Completely and Tightening the Nut Securely Against the Load. Eyebolts Must Be Installed Into a Tapped Hole With a Minimum Depth of two Times the Shank Diameter. Make Sure the Threads on the Shank and in the Hole are Clean and Undamaged. Always Lift the Load With a Steady, Even Pull. Do Not Shock Load Loads Must be Applied Parallel to the Plane of the Eye and Never Across the Plane of the Eye. DO NOT EXCEED THE WORKING LOAD LIMIT