Description: This odorless, one-part, self-curing, acrylic latex caulk provides a flexible seal that bonds to most common household surfaces. Tub and tile caulks are designed to complement all Bostik grout colors. Directions for Use: Read and understand datasheet completely before beginning installation. Always do a test to ensure product satisfaction and/or to become familiar with proper application techniques prior to use. Use Bostik Tub & Tile Caulk to seal around bathtubs, shower enclosures, vanities, counter tops, basins and many other areas. Application: Do not apply where surface or ambient temperatures are below 40˚F. Cut cartridge nozzle with a sharp blade to desired size for particular application. The inner foil seal must be punctured with an awl, wire or screwdriver. Insert cartridge into caulking gun. Apply caulking while holding at a 45˚ angle, gun material into joint. Avoid excessive gun pumping action when approaching the end of a joint. After installation of caulk, the joint should immediately be tooled with a spatula, spoon or similar item to reduce voids and provide a consistent joint. Allow finished joint to cure 24 hours before subjecting it to water or contact. Surface Preparation: All surfaces must be clean, dry, and free from surface contaminants including pervious waxes, coatings and sealants. Clean up: Clean all tools with soap and warm water. Remove cured caulk with a sharp blade. Cure for at least 24 hours before exposing to freezing temperatures or intermittent moisture contact. Storage/Shelf Life: Store in temperatures between 40˚F and 100˚F. Shelf life is one year from the date of manufacturing.