Input 75W +75 W (4Ω), recording output, 50W +50 W RMS continuous output (8Ω), A speaker output line 1 line 1 line 1 line 3 separate input and output lines, Phono (switchable MM / MC), recording output, separate input and output, B2 system amplifier circuit (simultaneously output AB), CSSC + ODβ output configuration, impedance PHONO input sensitivity / input bipolar parallel push-pull (MM): 3.0mV / 47kΩ, PHONO (MC): 0.38mV / 100Ω, LINE: 180mV / 47kΩ (IHF-A, tone defeat on), 20Hz ~ 80kHz over 100dB: ratio (20Hz ~ 20kHz / 8Ω) S / N, line frequency characteristic (1kHz / 8Ω), less than 0.04% total harmonic distortion 0.005% or less (+0,-3.0dB) accessory equipment, switch the power switch the front panel, sound volume, mute, input selector speaker selector (off / A / B / A + B), LR balance volume cartridge selector (MM / MC), separate switch tone control (BASS / TREBLE), switching turnover, tone defeat switch low-cut switch, mono switch, monitor switch, headphone output jack [unit rear panel], signal ground terminal, (electrical Appliance and Material Safety Law), Dimensions (when no signal) 40W, 117W AC power inlet weight 400 (W) × 169 (H) × 330 (D: including front knobs 24mm, 27mm rear terminal) mm, 15.0kg ((RA-19), (JPA-10000 remote control power cable accessories): Body type line cable is not attached to this product) ※ marked with polarity. Please purchase separately.