The Bathroom Anywhere system by Thetford is a waste water transfer system that allows for an additional bathroom where there are no existing plumbing lines. The rear discharge toilet sends waste to a macerating pump which disintegrates waste and pumps it out up to an 18-Foot vertical rise and 150-Foot horizontal run in less than 3 seconds. A strong suction draws waste into the unit and a uniquely-molded blade prevents materials from getting clogged. The system includes vitreous china, rear discharge toilet bowl; toilet tank and the macerating pump. The pump includes a 1-1/4-Inch outlet for waste and water, 1-1/2-Inch vent, 1 1/2-Inch inlet for a sink and a 2-Inch inlet for a shower/tub. If a sink or shower/tub is not used the inlets can be capped off. The system is ideal for adding a bathroom to basements, loft conversions, en-suite bathrooms, elderly or disabled facilities, garage conversions and rooms with slab floors. There are three easy installation options. Option one is to hide the macerator pump and plumbing behind the wall. Option two is to have the plumbing hidden and the macerator pump exposed. Option three is to have the macerator pump and the plumbing exposed. Plumbing knowledge or a licensed plumber is recommended for installation. The Bathroom Anywhere macerator pump has a unique split design which sets it apart from similar systems. The split design allows fast and easy service access to the pump if necessary without disconnecting plumbing lines and fixtures. The pump is 120-Volt, .80 horse power, includes a 6-Foot power cord (grounded plug) and has a 60-Gallon per minute capacity. It also features integral, anti-siphon backflow protection. The system requires but does not include; a GFCI electrical outlet, plumbing fittings and pipes and water supply. The system is backed by a three year limited warranty.