The OREGON PowerNow CS250E6 40V Max* Chainsaw Kit with Endurance Battery Pack is a lithium ion battery-powered chainsaw that delivers a combination of performance and features that makes it a true alternative to many gas-powered chainsaws. For removing trees, cleaning up after a storm, pruning large branches or clearing debris from property, you can depend on the OREGON PowerNow 40V MAX* Chainsaw. The OREGON PowerNow Chainsaw, with its lithium ion battery pack, offers instant starting without a pull cord, powerful cutting with no-fade power, and long runtime. It is a smarter, quieter way to work free from the hassles of gasoline or cords. When not in use, the lithium ion battery pack holds a charge for months at a time, so the PowerNow Chainsaw is ready when you are. Equipped with a 14-inch bar, the PowerNow Chainsaw can power through logs as large as 10 to 12-inches. For smaller cuts, the CS250E6 chainsaw goes non-stop, cutting up to 250 two to three inch branches on a single charge. This performance may vary with user technique, chain sharpness, size and type of wood. The PowerNow Chainsaw is much quieter than gas-powered chainsaws in use and is silent between cuts. At 12 pounds, the PowerNow Chainsaw is lightweight, easily portable and offers ergonomic comfort. Not only is the PowerNow Chainsaw powerful, but it is free from the hassles of gasoline or power cords. The PowerNow Chainsaw starts instantly with the pull of a trigger – no pull cords, no gas, and no warm-up times. The PowerNow Chainsaw features the PowerSharp built-in chain sharpening system so you’ll never cut with a dull chain again. When the chain dulls, simply pull the PowerSharp lever for 3 to 5 seconds with the saw running and the chain will work like new. The OREGON PowerNow CS250E6 Chainsaw Kit features the 2.4Ah B400E 40V MAX* Battery Pack. The B400E has no memory effect, charge maintenance and full discharge is NOT necessary to retain consistent capacity throughout the life of the battery. A completely discharged B400E battery pack will take approximately 120 minutes to charge on the C600 Standard Charger. (*Fully charged battery voltage measured without a workload is 40 volts. Nominal voltage is 37)