Angelynn"s "Sariea" Earring Angel. It"s the capacity, quality and trouble-free design that sets this fabulous earring organizer apart from the rest. Search ALL DEPARTMENTS for Angelynn"s Jewelry Organizers to see our entire collection of high quality jewelry organizers that are available in different styles and finishes matching most any decor. * To insure the authenticity of this product buy directly from Seller listed as "Angelynn"s Jewelry Organizers". QUALITY: Made with USA Carbon Steel with an elegant durable baked on powder-coat finish. It will last a lifetime with proper use. DIMENSIONS: 12" tall x 12" wide and is offset from the wall by 1 1/4". The Wall Mount Earring Angel gives you options, you can hang it on a door, wall, inside a cabinet or closet. * TO USE: Attach the post back (if there is one), leaving a small space on the post. Place the back through the keyhole and slide down into the slot. It"s that easy! There is no need to feed an earring post through a tiny hole and then try to attach the back, truly trouble free. If there is no post back, just hang them. Basically, it is best to put your longest earrings on the bottom and the smallest ones to fill in. Long dangles, chandelier & hoop earrings go on the bottom row of round holes or the bottom row of keyholes. * EARRING CAPACITY & STORAGE: Easily stores **58 pairs of pierced earrings (if all of your earrings measure **2" long x 1" wide) at least 58 pair will easily fit; keeping them all up & out of harm"s way, beautifully displayed, seen at a glance and tangle free. Making it very simple to see and choose what you want to wear. Many customers have used S hooks on the bottom row of round holes and used them to hold their necklaces and bracelets, making the Steel Earring Angel a multi-purpose jewelry organizer. There is 1 1/4" of clearance between the wall and the front of the organizer so the bottom row of round holes has the room to accommodate 2 1/8" diameter hoops. * INSTALLATION: Level and mark for mounting. Be sure that the single row of ROUND holes are on the bottom. Just drive the 1 1/4 inch multi-purpose anchor screws (WALL DOG Screw & Anchor in One as photographed...seen in the Black) directly through each of the 4 keyhole-screw holes. The backside screw holes are easily seen and accessible through 4 front keyholes. The heavy duty screw/anchors I provide can be used on plywood, wallboard, concrete, block, brick or plaster according to the manufacturer. ***You can also use 1" Heavy Duty Foam Tape (not provided) or 4 Large Command Strips (not provided) for smooth surfaces, glass or mirrors. Follow their directions and only use only new-fresh-non-yellowed 3M or Scotch brand tapes. Do not install on wall papered walls.