PVC Card Embosser is the necessary equipment at the end of the process of producing PVC card, which is perfect for personalization of your VIP cards, club cards, membership Cards, gift cards etc. It makes PVC cards identified or exclusive by printing convex characters on them. * This Manual PVC Card Embosser Machine we offer has the characteristics of heavy duty reliable structure, accurate orientation, small volume, beautiful appearanceand convenient operation. Compared with electric embossing machines, this manual machine is more economical and better suited for small batch or personalization jobs. * Means:use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut,and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. * Attention:turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters.After finishing,please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable,and then use the Z outside-hexagonal spanner to fasten the hold-downscrew. * How to Use:1.Put the card in the card frame and fix it.2.Move the frame and choose the position what you need.3.Write the daisy characters plate ,use the pointer to choose the characters you need.4.After doing step 1~3,jolt the hand-haft.5.If the embossment depth is out fit what you need,you can adjust the bolt in adjusting hole at the bottom of machine .You can use 4th inner hexagon spanner to untie the bolt,and then use 8th outer hexagon spanner to untie outer bolt,after adjusting,please screw the bolt.6.There are 2 different spacing for large or small fonts,1/7 or 1/10.