AQUAMIX LOW SHEEN SEALER is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish eliminating conventional two-step methods. May also be used as a pre-grouting sealer over clean tile surfaces a minimum of 2 hours prior to grouting. Allows moisture vapor transmission and is not affected by ultra-violet light. Uses: Recommended for use on porous surfaces such as saltillo, terra cotta, adobe, slate, flagstone, sandstone and quarry tile. Equally effective for interior and exterior applications. Expected Wear: Will vary depending on hardness and texture of surface, type of area, surface wear, frequency and type of maintenance products used. Expected wear is up to 3 years. Coverage: Approximately 300 to 1,000 sq. ft. per coat per gallon, depending on type of tile, porosity and texture of surface, temperature, humidity and method of application