Amflo 516-50E Gray 300 PSI Rubber Air Hose 1/4\" x 50\" With 1/4\" MNPT End Fittings, Industrial Coupler, Plug, And Field Repairable Ends
Price 38.62 - 73.13 USD
The Amflo 516-50E gray rubber air hose has a 1/4" ID and is 50 ft. long. Its rubber construction provides resistance to abrasion and allows the hose to remain flexible at temperatures ranging from -40 to +130 degrees F. Its polyester yarn reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi), and it comes equipped with two 1/4" factory-installed brass male National Pipe Thread Taper (NPT) fittings with attached brass industrial interchange coupling and connector components for compatibility with systems that use this coupling option. This hose is suitable for a wide range of commercial and industrial pneumatic applications.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Plews & Edelmann manufactures automotive and pneumatic hose, lines, reels, accessories, fittings, and lubricants under the Edelmann, Amflo, Omega, LubriMatic, and UltraLube brands. The company, founded in 1909, is headquartered in Dixon, IL.