Ethernet Extender is a innovative product which can boost 10M/100M signal of the Ethernet (including DSL, HFC, FTTB+LAN etc) to more than 1000ft or 2000ft (as Ethernet Repeater) over a CAT5e cable, with 1 uplink port and 4 out port, each port reach 1000ft, support mid-span PoE (power over Ethernet) and stack link, ethernet extender can be linked to switch, hub, router, ADSL modem network, Ethernet industry equipment etc, aids you integrate long range Ethernet at lowest cost rapidly. Ethernet Extender is unique because it allows network managers to extend a network beyond 300 feet by using the standard Cat5E cables. There is one input port and four output ports and hence one can connect up to four network devices (one in each port) over a distance of up to 1000 feet. What more, the device itself can be connected (using the input port) to a switch that is located up to 1000 feet away and hence the total achievable LAN extender distance is around 2000 feet! This device supports POE (Power Over Ethernet) and hence you don"t need to connect a separate power cable for POE connected devices like Wireless Access Points, IP Phones, IP Surveillance cameras. Since Ethernet Amplifier is a plug and play device, there is no configuration needed and it can be easily installed. Ethernet Extender has a built-in lightning surge protection. There are LED lights to indicate power status, line-connectivity status, etc. Since it supports 10/100Mbps it can work with some of the older network switches. It is also compatible with other 802.3 network extender devices. OuOur Ethernet Extender which act as Ethernet Amplifier, Ethernet Switch and Ethernet Repeater is an excellent low-cost option for Ethernet Extension connections/devices for up to 2000ft signal booster using a single Cat 5E cable with built-in PoE, Surge Protector, and supports up to 4 multiple devices.