New fast-cast resin that was developed specifically for adding color pigments and fillers to achieve true color representation or filler effect. Small amounts of pigment will yield accurate, vivid colors from cured castings. Vacuum degassing is not necessary. Convenient one-to-one mix ratio (one part A to one part B by volume). The differences between them are pot life and demold time. Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for Smooth-Cast Liquid Plastics include reproducing small to medium size sculptures, cold cast bronze castings, making prototype models, roto cast pieces, special effect props, and decorative jewelry. Net weight 32 oz. (909 grams).Technical Information: pot life: 2.5 minutes, demold time (depending on mass): 7-10 minutes, shrinkage: .01 in./in., viscosity: 100 cups, S.G. g/cm3: 1.07, S.V. cu. in./lb.: 27.7, ultimate tensile strength: 3,170 PSI