Headstock Turret Tool Post Chip Pan & Splash Guard Included Grizzly 10" x 22" Bench Top Metal LatheOur 10" x 22" Bench Lathe sports generous capacity, a lot of thread ranges, a wider bed and a larger chuck. Yet, it costs just a little more than our G4000. With features like a 1-inch spindle bore, 3/4-inch x 12 TPI lead screw and an MT#3 tailstock you"ll be able to turn some surprisingly hefty projects — and a few heads. If you are thinking of making parts for models, engines or even for repairs around the home or shop, take a good look at this lathe & the specs below. Spindle & SpeedsFeatures a 1-inch spindle bore and 1-3/4-inch x 8 TPI spindle with MT4 spindle taper. Six speed range: 150, 300, 560, 720, 1200 and 2400 RPM. ThreadingThreading capabilities of 33 inch threads from 8 to 72 TPI and 26 metric threads from 0.25mm to 3.5mm. Standard EquipmentIncludes 5-inch three-jaw chuck, 6-1/2-inch four-jaw chuck, 8-inch faceplate, steady rest, follow rest, MT#3 dead center, 4-way tool post, chip tray, backsplash, hardened and ground v-way bed, oil-bath gearbox and tool box with service tools. Specifications Swing over bed: 9-5/8-inch Swing over cross slide: 6-1/8-inch Distance between centers: 22-inch Spindle bore: 1-inch Spindle thread: 1-3/4-inch x 8 TPI Spindle taper: MT #4 Motor: 1 HP, 110V, single-phase Number of speeds: 6 Range of speeds: 150, 300, 560, 720, 1200, 2400 RPM Leadscrew: 3/4" to 12 TPI Compound travel: 3-1/2-inch Cross slide travel: 6-1/2-inch Carriage travel: 18-1/2-inch Maximum tool size: 1/2-inch Tailstock barrel travel: 2-1/2-inch Tailstock barrel taper: MT #3 Number of longitudinal feeds: 9 Range of longitudinal feeds: 0.0023 to 0.013 IPR Number of inch threads: 33 Range of inch threads: 8 to 72 TPI Number of metric threads: 26 Range of metric threads: 0.25 to 3.5mm Overall dimensions: 46 x 22 x 16-5/8 inches (LxWxH) Approximate shipping weight: 432 pounds