MacRepeater allows two fast and easy ways to expand your home or office network with new or larger wireless zones. Plug MacRepeater into a U.S. or Canadian wall outlet within your wireless networks range and it will pickup and rebroadcast your wireless signal creating a larger wireless network.MacRepeater can also be installed outside your current wireless network by running a cable to it, allowing you to create new wireless zones. Multiple access points can be added by using more than one MacRepeater. Multiple access points can be used to provide complete wireless access throughout even the largest home or office or just to organize traffic and reduce bottlenecks that can result from multiple users or high traffic video devices using the same wireless access point.Operating at the signal level, MacRepeater is compatible with almost any device that uses WiFi. MacRepeater can expand your network to allow Macintosh, PC, iPad, TiVo, or almost any wireless device to reach your wireless source. MacRepeater supports the latest (2.0) 802.11n WiFi standard as well as older standards like 802.11g (54 Mbit/s) and 802.11b (11 Mbit/s) which means it can work with older or newer wireless routers from almost any manufacturer and can even be used to add wireless to older routers that do not have built in wireless.Installation is fast and simple. Use the included RJ-45 cable to connect your MacRepeater to a Macintosh or PC computer and type the address listed on the repeater into a web browser. A web page opens that allows you to use a wizard to setup MacRepeater with a few simple choices or provides you with detailed control of the device for more advanced configuration options. Because MacRepeater uses a web interface rather than PC software to change settings there is no software to worry about losing and any computer with an Ethernet port can be used to change settings.