Magic-Sculpt is a two-part epoxy clay specifically designed to meet the needs of modelers, crafters and sculptors alike. One of the only epoxies that will smooth out with water. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Magic-Sculpt will cure at room temperature. Magic-Sculpt. For Crafts and Hobbies, Magic-Sculpt is both a medium and an ingredient for any project requiring sculpting. * Your imagination is the only limit when it comes to devising uses for Magic-Sculpt. * It is very pliable in its mixed form, has excellent adhesion, cleans up easily with soap and water, and will cure to a hard, solid finish that can be painted, sanded or ground. * Magic-Sculpt serves so many purposes it eliminates many of the different formulas cluttering your workspace. And, with its indefinite shelf life, you do not need to worry about whether you have enough of this or that, just keep a stock of Magic-Sculpt sitting on your countertop. * Magic-Sculpt is a two part epoxy putty that comes in two containers, one resin and one hardener. Magic-Sculpt is mixed 1 to 1 by volume in small quantities as you need it. Almost anything can be used as an armature, such as armature wire, metal mesh, styrofoam, wood and balled up tin foil. * Once you have completely mixed the two components, you have about 45 min to 1 hour of working time (depending on the temperature in your workspace, cold = longer working time, hot = shorter working time) Magic-Sculpt will cure fully overnight to a rock hard finish that is easily painted. * The surface of your Magic-Sculpt sculpture can be smoothed with water before it cures. Approximate Coverage in 1/4in thickness 1lb unit = .5 sq ft