ZS Multi Surface Suction Car Mount for the Samsung Galaxy Note II / Note 2. Dedicated clip in cradle made & designed to hold the NOTE 2 securely. All function areas and the camera remain accessible. Suitable for most flat surfaces apply directly to the dashboard, console area or use on the windscreen. PU coated suction cup allows this mount to adhere to dashboards without additional dash discs or friction mounts. Simply apply directly to a convenient flat area and view or apply to the windscreen in the traditional way for a really FIRM grip to glass. The special PU coated 60mm suction cup is tacky to touch but it"s not adhesive. So it can be remove, re- apply and adjusted or transferred between vehicles. The sucker requires a minimum flat area of just 70mm diameter for a good grip. This mount will even hold to textured dashboards and console areas. Dedicated Galaxy Note 2 holder, you must remove any case before inserting. Arm length approx 60mm - low level design, neat and unobtrusive. To apply Ensure area is flat, clean & dust free. Remove the protective film from the sucker & position. Pull down lever to expel the air & create the vacuum. Give it a wiggle to ensure it"s holding firm then insert your phone onto the holder. To remove. Lift lever & pull release tab to break the vacuum. NOTE: Please do not just pull the mount off the surface, you WILL damage it. Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry. Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.