Heavy-duty, low-foaming stripper designed to quickly remove heavy floor finish buildup without the need for scrubbing. Will strip away multiple coats of finish. Free rinsing. it"s a low-foaming stripper that uses chemical action to remove multiple layers of floor finish with minimal manual labor. You simply rinse or mop away residue. Applicable for schools, shopping malls, grocery stores, airports. Floor stripping without agitation: dilute 1 part z-tread heavy-duty stripper to 4 parts hot (130 degree - 150 degree F or 54 - 66 degree C) water. Spread solution generously over area to be stripped. Allow solution to soak for at least 5 - 8 minutes. Pick up solution completely with clean mop or wet vacuum. Rinse twice and allow to dry before applying finish. Floor stripping with agitation: dilute 1 part z-tread heavy-duty stripper to 4 parts hot (130 degree - 150 degree F or 54 degree - 66 degree C) water. Spread over area to be stripped and allow to soak 5 - 8 minutes. Agitate with a brush or stripping pad either manually or with a floor machine. Pick up solution completely with clean mop or wet vacuum. Be sure to remove any wheel tracks with a clean damp mop. Rinse twice and allow to dry before applying finish. Physical form: liquid. Color: clear/colorless. Odor: mild. pH: 12.1. Specific gravity: 0.98. Flash point (TCC): 136 degree F (58 degree C). Boiling point: 200 degree F (93 degree C). Shelf life: 1 year minimum. Safety: avoid contact with eyes, skin and clothing. Do not breathe vapor or mist. Use with adequate ventilation. Do not ingest. Do not reuse container. Wash thoroughly after handling. Observe label precautions. 4 gallons Capacity.