26092 Voltage: 120.00 V (part# 26092) This item features: -Shown on optional No. 200A stand. -Threads 1/4"-2" pipe at 36 RPM and 2 1/2"- 4" at 12 RPM. -The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C. -An induction motor helps insure sound levels well within the limits set by the regulating authorities. -A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. -1/4" - 2" Universal Die Head; 2 1/2" - 4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. -Constant and proper lubrication of dies and workpiece with through-head oiling. -Motor Control: Reverse/off/forward, heavy-duty rotary-type and integral foot switch. -Gear Box: Two-speed gear box 3:1 ratio. -Chuck: Hammer-type with replaceable rocker-action jaw inserts. -Oiling: Through-die head. -Pump: Self-priming, GEROTO-type, automatic-reversing, constant-flow. -Frequency: 60.0 Hz. -Speed: 36 rpm, 12 rpm. -Pipe Cap.: 1/2 in (NPT) [Min], 4 in (NPT) [Max]. -Power Cap.: 1 1/2 hp [Max]. -Phase: Single. -Includes: 1-No. 714 (914) 2 1/2 - 4 in. Receding Self-Opening Die Head, 1-No. 711 (911) 1/4 - 2 in. Universal Self-Opening Die Head, 1-Set 1/2 - 3/4 in. Universal Alloy Dies, 1-Set 1 - 2 in. Universal Alloy Dies, 1-Set 2 1/2 - 4 in. 1224 High Speed Dies, 1-Gallon Nu-Clear Oil, 3-Hex Keys, 1-spare F-229 Cutter Wheel, 1-3/4 in. Combination Wrench, 1-Tool Box, 1-No. 744 Reamer, 1-No. 764 Cutter. -Wt.: 509 lb. -Price is for 1 Each. Testing and approvals: -CSA. -UL.