The Gear One PA2400 features two 400W amps that can be directed to left/right mains, mains/monitors, or bridged for a 800W mono. Each amp is plenty for powering most 15" two-way speakers. If you need a system with rock band club capability, the PA2400 has plenty of juice to handle the gig. Each channel is equipped with a three-band EQ and FX/aux level, as well as a pan knob and a monitor level. Another feature of the PA2400 mixer is a pair of seven-band graphics, one for each amp. These make a huge difference because when you use monitors, they often need a completely different EQ profile than the mains. Having a dedicated monitor EQ lets you get more volume out of your monitors while avoiding feedback. It features 24-bit FX processing with 100 preset selections including combinations of reverb, delay, echo, chorus, flanger, and rotary FX, each with variable parameters. Dialing up a preset couldnt be easier. You simply turn a knob until the presets number shows in the display, then press the knob to select it. The PA2400 has separate FX level controls for mains and monitors, and also provides a jack for connecting a footswitch that turns the FX on or off remotely. Portable and ergonomically designed, with well-placed handles on each end, you won"t break your back getting to and from your performance or practice space. The box features a tilt-back panel so when placed on a table, the control panel is at a perfect angle. If you are assembling a system that will let your band rehearse or perform, the PA2400 is a superb solution.Two 400W power amps Assignable power output (monitors and/or mains) Eight inputs Built-in 24-bit FX Dual 7-band Equalizers Monitor send per channel