A major breakthrough in driveway cleaning technology. The proprietary formulation of krud kutter contains "oil grabber", a unique additive which penetrates the surface to dissolve tough stains from grease, oil, algae, mildew, and dirt. The concentrated formula is ideal for use on concrete, brick, masonry, asphalt, driveways, patios, sidewalks, garage and basement floors. It also prepares surfaces for finishing by promoting the adhesion of paint, stain and sealers. Directions for use in a pressure washer: Rinse surrounding plants with water, before and after application. Wet the surface to be cleaned, prior to applying the product. Place detergent application siphon tube and screen filter directly into container. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour product (full strength) into pressure washer. Spray at low pressure onto a wet surface. Allow product to remain on the surface for 3 to 5 minutes to penetrate. Do not allow product to dry on surface. Remove siphon tube from solution and rinse surface with high pressure spray thoroughly. Flush siphon tube with clean water prior to storage. Contains: A proprietary blend of biodegradable surfactants, detergents, and emulsifiers, in a water-based solution. No petroleum solvents, bleach or ammonia. Caution: eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. Do not mix this product with any other chemicals. Keep out of reach of children. Sweet odor. Container size: 1 gallon.