Morris Products 96110 Above Ground Insulation Piercing Connector, 1 Port, 1/0 - 8 Main Range, 1/0 - 8 Tap Range

Price 21.08 - 22.57 USD

EAN/UPC/ISBN Code 601986961103


Manufacture Morris Products, Inc.

Manufacture Country USA

MPQ4757 Features: * Above ground insulation piercing connectors * Made from high - strength fiber - reinforced thermoplastic and galvanized steel bolts * Installs in just minutes saving many man - hours on the job * Eliminates wire stripping, connecting and taping of split bolts and adding inhibitor * Above ground connector can be installed on energized circuits eliminating power shutdowns * Overhead services - both insulated and bare mains, above grade URD services, street lighting, non - tension splicing and tapping * Insulated replacement for split bolts, tapping without cutting the main, gutter taps * Double shear - head bolt guarantees correct torque tightening every time, ensuring a quality connection and eliminating the possibility of hot spots, damaged wires or loose connections * No cable stripping required, simply insert the jacketed cable into the entry port and tighten with a 0.5"" 6 point socket * Turbo spacer allows tap side to remain open while you hand tighten the DIY above ground connector on the main wire * Blue rubber insert recreates insulation when used on bare wire and used to avoid any damage on neutral messenger * Bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear - head * Installer has no contact at any point with an energized part * Can be installed on energized conductors, however, the tap must not be under load * Corrosion - free connection is good for hot, cold, damp and salty connections * Properly installed the connector seals water - tight * Accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water * Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized * UL486B Listed for cu to cu, al to al and cu to al * Meets ANSI C119.4 requirements * Number of ports: 1 * Torque / Inch-lb.: 125 * Bolt head size: 0.5"" * Main / tap range: 1/0 - 8 * Box quantity: 12 Specifications: * 600 Volt 194 F (90 C) rated Dimensions: * Dimensions: 3.7"" H x 2"" W x 3"" D