TNU1006 Features: * Microphone * Two elements (condenser and dynamic) enclosed in a single housing * Perfect for kick drum, guitar amps, percussion and other instruments * Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones * Corrosion-resistant contacts from gold-plated XLRM-type connector * Condenser, dynamic * Hypercardioid (dynamic) * Polar patterns: cardioid (condenser) * Switches: flat, roll-off * Neodymium dynamic element provides punch and attack, while the condenser element captures the full audio spectrum * Cable: 5.0 m (16.5") dual shielded, 8-conductor cable, 5-pin xlrf-type connector at microphone, two 3-pin xlrm-type output connector * Output connector: integral 5-pin xlrm-type * 600 ohms (dynamic) * Accessories furnished: AT8471 isolation clamp for 0.63"-27 threaded stands * 0.63"-27 to 0.38"-16 adapter * Soft protective pouch * Impedance: 50 ohms (condenser) Includes: * Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp Construction: * Rugged, all-metal design and construction for years of trouble-free use Specifications: * Integral 80 Hz HPF switch and 10 dB pad (condenser element) * 10 db pad (condenser only) * Signal-to-noise ratio: 68 db, 1 khz at 1 pa (condenser) * Open circuit sensitivity: "49 db (3.5 mv) re 1v at 1 pa (condenser) * Frequency response: 40-20,000 Hz (condenser) * Phantom power requirements: 11-52v dc, 3.5 ma typical (condenser) * Maximum input sound level: 148 db spl, 1 khz at 1pct t.h.d. (condenser) * Dynamic range (typical): 122 db, 1 khz at max spl (condenser) * 40-15,000 Hz (dynamic) * Low frequency roll-off: 80 Hz, 12 db/octave (condenser) Dimensions: * Weight: 320 g (11.3 oz)