OIT2586 Features: * Equipped with one drop-forged steel, corrosion-resistant Klein-Lok locking snap-hook with 11/16"" (17 mm) throat opening * Overlapped nylon webbing heavily cross stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction * Progressive tearing away of nylon stitching absorbs most of a fall-arrest impact * Extends original length of lanyard by 3.5" and virtually eliminates rebound * Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16"" (17 mm) throat opening * Deceleration unit is attached to a 1/2"" (13 mm) diameter nylon-filament rope lanyard * Designed solely for use in fall-arrest systems * Deceleration unit is attached to a vinyl-coated flexible steel cable that is 7/32"" (6 mm) in diameter and has a total diameter of 9/32"" (7 mm) * Designed for use in 100pct tie-off fall-arrest systems. Allows attachment to a new fall-arrest anchorage with one lanyard leg, while staying connected to the original fall-arrest anchorage with the remaining lanyard leg * Deceleration unit is attached to 2 half inch nylon-filament rope lanyards * Nylon rope has good elasticity and abrasion resistance * Equipped with three drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16"" (17 mm) throat opening * Deceleration unit is attached to 1"" (25 mm) wide orange nylon-webbing lanyard impregnated with resin for greater durability and abrasion resistance * Nylon-webbing lanyards are ideal for situations where the worker is often turning or moving around (webbing will not reverse-twist [hockle]) * Type: Declaration Unit * Testing and approvals: * ANSI * CSA Certified Construction: * Long-strand nylon filament lanyard construction provides high tensile strength and good abrasion resistance Color/Finish: * Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller, and is proof-loaded to meet OSHA regulations