This is the glow powered, 2.4GHz radio controlled, ready to run, 1/10 scale Tomahawk ST Racing Truggy with Orange and Red Body from Thunder Tiger. FEATURES: Chassis: Anodized aluminum alloy 0.12" (3mm) thick Drive: Four wheel shaft drive Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018), glow plug and foam air filter Exhaust: Aluminum tuned pipe, polished natural finish Radio: 2-channel 2.4GHz IFHSS with standard size and torque steering servo, transmitter has charge jack Fuel Tank: 2.5oz (75cc) Differentials: Bevel gear Transmission: Single speed Brake: Fiberglass disc Clutch: Two shoe composite Clutch Bell: 14 tooth steel Spur Gear: 45 tooth composite Steering: Ball bearing equipped bellcrank type with servo saver Shocks: Composite body, oil filled Body: Painted and trimmed Wheels: Black plastic split spoke 14mm hex 2" (50mm) wide, 2.2" (56mm) diameter Tires: Small block patterns 3.93" (100mm) diameter, 2.08" (53mm) wide with foam inserts Ball Bearings: Installed on axles Suspension: Double wishbone with ultra long racing suspension arms Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Warranty: Thunder Tiger guarantees this truck to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase INCLUDES: RTR 1/10 scale Tomahawk ST Truggy with .18 cu in engine, 2.4GHz radio tuned pipe, painted body with wing, instruction manual, tires, wheels, foam inserts and instruction manual REQUIRES: Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break-in) AA Batteries: 12, 8 for transmitter 4 for battery box Building and track equipment SPECS: Vehicle; Length: 17.71" (450mm) Width: 12.9" (330mm) Height: 5.9" (150mm) Wheelbase: 11.61" (295mm) Weight: 4.48lbs (2030g) approximately Body; Length: 14.4" (366mm) Width: 6.5" (165mm) Height: 3.9" (100mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x14mm Fr Diff 1 DTXC1583 2 8x14mm Rear Diff 1 DTXC1583 2 8x14mm Spur Gear Shaft 1 DTXC1583 4 10x15mm Front Axle 2 DTXC1595 4 10x15mm Rear Axle 2 DTXC1595 4 5x8mm Steering Bellcrank 2 DTXC1523 2 5x10mm Clutch 1 DTXC1535 jxs 12/22/10 ir/jxs