This is the Radio Controlled, Glow Powered, 1/8 scale DNX408T Truggy Kit from Team Durango. FEATURES: Chassis: 0.20" (5mm) thick aluminum with black plastic side guards Drive: Four wheel shaft Engine Mount: Machined aluminum one-piece design Clutch: Three aluminum shoes, 13 tooth clutch bell Fuel Tank: 5oz (150cc) Body: Clear untrimmed truggy body with black plastic rear wing Radio Box: Plastic Shocks: Aluminum body, oil-filled 15mm big bore, thicker diaphragms resist tearing Shock Towers: 0.20" (5mm) thick aluminum Brake: Piston pushes on exact center of brake pad and machined bulkheads and pad mounts result in zero flex Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: DNX408T Truggy Kit with Body, Rear Wing, Air Filter, Shocks, Decals, and Instruction Manual REQUIRES: Radio: 2-channel with high-torque steering servo Engine: .21 cu in (3.4 cc) truggy engine Tuned Pipe: For 1/8 scale buggy Fuel: Car blend, 20% nitro content Tires: 1/8 scale truggy type w/foam inserts Receiver Battery: 6-cell flat NiMH or 2-cell LiPo/LiFe battery Battery Charger: Compatible with selected battery Building and track equipment SPECS: Vehicle- Length: 17.9" (455mm) Width: 16.6" (422mm) Wheelbase: 14.8 - 15" (375 - 382mm) Internal Gear Ratio: 3.31:1 Weight: 141oz (4000g) Body- Length: 17.0" (433mm) Width: 7.0" (177mm) Height: 4.7" (120mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x14mm flanged Fr Diff 1 TDRC1320 2 8x14mm flanged Fr Diff 1 TDRC1320 2 8x16mm Rear Diff 1 DTXC1585 2 8x16mm Rear Diff 1 DTXC1585 2 10x15mm Mid Driveshaft 1 DTXC1595 4 8x16mm Rear Uprights 2 DTXC1585 4 8x16mm Front Uprights 2 DTXC1585 4 6x10mm Steering 2 DTXC1561 2 5x10mm Clutch 1 DTXC1535 jxs 04/16/12 ir/jxs