This is a PROFILE TOWER FUN P-51D (flat fuselage) Aerobatic Airplane. ***The correct leading/edge balsa wood size is 1/4" x 1-1/4" x 24".*** ***The parts list is correct.*** ***In the manual on page 12, it says 1/4"x1-1/8"x24"-this is incorrect.*** FEATURES: Quick building time (approximately 24 hours). Profile fuselage for great knife edges and 3D maneuvers. D-tube wing with symmetrical airfoil and fully sheeted leading edge Plywood engine mount rails for solid engine mounting. INCLUDES: Full-Sized Rolled Plans, Photo-Illustrated Instructions, Aluminum Main Landing Gear, Pushrods, and Basic Hardware. REQUIRES: Radio: 4 Channel (ailerons, elevator, rudder, throttle) Servos: 5 Standard Y-Harness (for aileron servos) Engine: .35-.50 (2-stroke) or .40-.52 (4-stroke) Covering: Two 6 Foot Rolls Misc. Items: 4oz Fuel Tank, Fuel Tubing, 2½" Main Wheels, 1" Tailwheel, Wheel Collars, 2½" Spinner, Foam Rubber, Building and Starting Equipment. SPECS: Wingspan: 44" (1120mm) Wing Area: 630 sq. in. (40.6 sq dm) Weight: 3.5-4.0lbs (1590-1810g) Wing Loading: 13-15 oz/sq ft (40-46g/sq dm) Fuselage length: 34.5" (880 mm) Airfoil: Fully-Symmetrical Mid-Wing COMMENTS: The kit is pictured on the box with Missle Red, Black, White and Aluminum covering. There are no decals included with this kit JAL 12/17/97 ir/jl Replacement parts are available through Great Planes. Please see the parts listing on the web page for this kit here at www.towerhobbies.com for full parts listing and parts purchasing information.