Contains PTFE and natural fillers. For use with potable water. NSF International: NSF/ANSI. U.S. military specifications. Uniform plumbing code. British standards. Certified ratings by UL of Canada. Designed for soft-setting, non-petroleum-based thread sealant for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. may be used on stainless steel, aluminum, brass, copper, iron, polyethylene, reinforced fiberglass and pvc. Not recommended for: Do not use V-2 on ABS and CPVC. For ABS and CPVC, use Jet-Lube TFW thread sealant with PTFE. Personal precautions: wear gloves and protective overalls. Environmental precautions: do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Handling: no special handling precautions necessary. Storage: do not store at elevated temperatures. Respiratory protection: none needed. Hand protection: protective gloves for hypersensitive persons. Eye protection: glasses, if applied to parts in motion. Body protection: overalls. Main hazards - health effects eyes: may cause irritation. Inhalation: viscous nature may block breathing passages if inhaled. Ingestion: may cause diarrhea. Skin: for hypersensitive persons, may irritate the skin after prolonged periods of contact. Service rating: 500 degree F (260 degree C). Eco certified. Size: 1/2 pt brush top can.