This is the Radio Controlled, Electric Powered, RR (Ready Built) Multiplex FunCub Trainer Airplane. Requires Transmitter, Receiver, Battery and Charger For Beginner Modeler/Fliers. FEATURES: Construction: Elapor foam white in color Wings: Two-piece all foam with plastic wing tube Aileron Control: Dual servo Flap Control: Dual servo Motor: Himax C 3516-0840 brushless Radio Compartment: Accessible under wing Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter, tailgear, prebent 0.039" (1mm) diameter wire Wheels: Main, two Elapor foam 4.75" (120mm), foam 2" (51mm) tailwheel Canopy: Elapor foam, detaches easily for battery access Decals: Peel and stick application with red and silver accents and black and gray window detail INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all hardware, six servos, brushless motor, 13x4 propeller, 30A ESC, pre-bent 0.039" (1mm) wire landing gear, two 4.75" (120mm) main main wheels, 2" (51mm) tailwheel, plastic motor mount, two fiberglass wing spars, two decal sheets, photo-illustrated instructions and tow hook REQUIRES: Battery: 2100-2500mAh LiPo Battery Connector Set: WSDM3001 if using battery listing in Accessory Guide, connector from ESC will have to be replaced Battery Charger: LiPo compatible with balancer Radio: At least 6-channel Misc. Items: Building and field equipment SPECS: Wingspan: 55.1" (1400mm) Wing Area: 588 sq in (38 sq dm) All Up Weight: 39.9oz (1130g) Wing Loading: 9.8oz/sq in (30g/sq dm) Length: 38.6" (980mm) Airfoil: Flat bottom high-wing placement Center of Gravity: 3.1" (80mm) Back from the wing"s leading edge at the fuselage Control Throws- Elevator: Up 0.59" (15mm), Down 0.47" (12mm) Rudder: Right to Left 0.59" (15mm) COMMENTS: This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer. jxs 12/07/12 ir/jxs