This is a radio controlled, glow powered, balsa and plywood / Carl Goldberg Tiger 2 .40 sport scale aerobatic airplane kit. / For beginner to intermediate modeler/fliers. / / FEATURES: All Carl Goldberg kits include fuselage alignment devices and most / feature highly-refined interlocking lite ply contruction methods. / Wings: One piece covered balsa and plywood construction. / Radio compartment: Large built in balsa and ply radio tray. / Landing gear: Wire main and nose / Hardware: Complete hardware included / Motor Mount: Included adjustable engine mount / Warranty: Carl Goldgerg Products guarantees this kit defect-free / in both materials and workmanship at the date of purchase. / / INCLUDES: All wood to construct airplane, pushrods, prebent wire aluminum main / landing gear, prebent nose wire, adjustable engine mount, horns, / decals, photo-illustrated instructions, full-size rolled plans. / / REQUIRES: Engine: .35-.45 cu in (5.7-7.4 cc) 2-stroke / OR .40-.50 cu in (6.5-8.2 cc) 4-stroke / Radio: 4-channel miniumum required / Servos: 4-standard servos / (1-ailerons, 1-elevator, 1-rudder, 1-throttle) / Covering: Two 6-foot rolls of covering. / Misc. Items: Three 2¼" wheels, 2¼" spinner, 6-8oz fuel tank, / 5/32" wheel collars, glow plug, ¼" foam rubber padding, 3" medium / fuel tubing, fuel filter, propeller, building and field equipment. / / SPECS: Wingspan: 61" (1549mm) / Wing Area: 680 sq in (4387sq cm) / Weight: 4.75 - 5.25lb / Airfoil: Fully-symmetrical Low Wing / Center of Gravity: 3½"-4-5/8" (88.9-117mm) / back from the wing"s leading edge at the fuselage sides. / Control Throws- control throws for rudder, elevator, and ailerons / are set off of included gauge in instruction manual. / pjm 3/21/03