This is the Futaba 2.4GHz S/FHSS 8JH Radio System with the R2008SB S.Bus capable Receiver. Does not include servos. This is the helicopter version which will default to helicopter settings when powered up and does not have a ratcheted throttle stick. FEATURES: Futaba S-FHSS 2.4GHz security (also FHSS compatible) Transfers model data wirelessly to and from one 8J to another Capable of 4 channels only in FHSS mode R2008SB receiver offers 8 PWM channels, S.Bus and HV capability and Dual Antenna Diversity Airplane and helicopter modes 20 model memory with 10 character model and user naming Large backlit LCD display (128 x 64 dot) 8 channels (one varible knob, five 2-position switches, two 3-position switches, one momentary switch and two digital levers) Failsafe on all 8 channels Easy jog dial and three button programming ATL Aux channel switch/level assignability One year limited warranty through Hobby Services beginning at date of purchase Airplane Mode Features; 6 Programmable Mixes Snap Roll Flaperons with Differential Rate Elevator/Flap Mixing Flap Trim Airbrake/Landing Differential Ailerons Aileron/Rudder Mixing V-Tail Mixing Flap/Elevator Mixing Elevon Gyro Sensitivity Ailevator Throttle Curve (five points) Throttle Needle Mixing (five points) Throttle Delay Idle Down (any switch selectable) Helicopter Mode Features; 8 Swash Plate Types 5 Flight Conditions (normal, idle up 1, idle up 2, idle up 3, hold) Throttle Curve (five points, five curves) Throttle Hold Hover Pitch Mixing Hover Throttle Mixing Gyro Sensitivity/Mixing Governor Setting/Mixing Hi/Lo Pitch Mixing Offset Mixing Condition Delay Throttle mixing (swash>throtttle) Throttle/Needle Mixing (5 point curve) Swash AFR Swash Mixing Electronic Swash Ring Throttle Delay Revolution Mixing 6 Programmable Mixes INCLUDES: 8J Transmitter R2008SB 8-channel Receiver, FUTL7608 Neckstrap On/Off Switch Instruction Manual REQUIRES: Four AA batteries for transmitter Servos of modeler"s choice COMMENTS: To use the NiMH battery FUTM1473, you will need to purchase charger FUTM1832. Than call Futaba Services at 217-398-8970 option 2 and they will send you a battery door- HSP82469. If you already have a charger and need a charge lead they can sell you part number- HSP29615. (requires soldering on the correct charger plugs) jxs 02/07/12 ir/jxs updt jpg 2/25/13