This is Devcon"s Plastic Welder with the Exclusive Applicator. FEATURES: A toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete, and standard thermoset plastics. The final adhesive bond is designed to be load bearing and resistant to weathering, humidity and wide temperature variations. Use for household, industrial, crafts, or any job that requires a high-strength, high-quality bond. Best used on these materials: -Hard Plastics -Metals -Concrete -Vinyl -PVC Piping -Fiberglass Cream drying color. Working time (the amount of time you have to apply the glue to your surfaces. This includes the mixing time.): 4 minutes. Handling time (the amount of time it takes for the glue to become tacky. This is the period in which the surfaces should not be repositioned or the glue smoothed out.): 15 minutes. Full bond strength in 24 hours. PSI strength: 3,500 pounds per square inch. Waterproof. Working temperature range (once fully cured it can withstand this temperature range): -40 degrees to +200 degrees fahrenheit. The exclusive applicator features a patent pending design that makes it easy to dispense and mix the right amount of adhesive for any job. The snap off cap eliminates unsafe cutting of the tube ends while the snap out paddle in the handle makes it easy to mix. Nozzle design lets even the thickest materials flow easily. Reseals for storage. Directions on package. INCLUDES: One Plastic Welder with Applicator SPECS: Net Volume: 25ml COMMENTS: Not recommended above 200 degrees fahrenheit (93-C). Low temperatures lengthen the set time. Does not bond to Polyethylene or Polypro- pylene Plastics. kr11/6/01 ir/kh