MonoKote is a patented, flexible Flat-finish polyester film that is inexpensive easy, clean, and (when compared to "old fashioned" coverings) quick to use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. FEATURES: Super strong with a tensile strength of 25,000 psi (pounds/sq in) Lightweight at only 0.2 oz/sq ft Dry adhesive activates when heat is applied Shrinks to a drum-tight finish as it cools Flat finish Fuelproof and waterproof Stronger and lighter than traditional silk and dope coverings May be cleaned with glass cleaner, "409", or MonoKote Cleaner/Polish INCLUDES: One roll (25" x 26") Flat Dove Gray covering, instructions REQUIRED: Sealing Iron (TOPR2100 Heat Gun (TOPR2000) Iron Sock (TOPR2175) COMMENTS: Not for use directly on foam! Suggest EconoKote for foam (TOPQ2601-TOPQ2614 Matching MonoKote Trim Sheet (gloss): NONE Matching MonoKote Covering (gloss): TOPQ0211 Matching EconoKote Covering (gloss): NONE (EconoKote can be used on top of MonoKote, but not under MonoKote.) If using 3 or less rolls of the same color, suggest a 6" roll (TOPQ0511). Temperature ranges: Attaching to wood (activating the glue): 215 - 240°F Partial shrinkage: 230 - 270°F Maximum shrinkage: 270 - 350°F NOTE: FLAT MonoKote tends to use a higher heat to apply (approx. 275 F). 4-10-98/eke ir/le JAL TECH NOTE: The characteristics of the flat MonoKote differ slightly from standared MonoKote covering: Flat MonoKote requires higher temperatures to apply than standard MonoKote because of the flat finish. In addition to the higher temp settings, this covering may require the iron to be in contact with the covering and wood slightly longer than the standard finish. If this covering is applied too loosely, it may be difficult to get a tight shrink with this product. Also, when applied loosely, it could become impossible to remove any wrinkles that may appear. updated 4/30/03 ldt